Contour Ditch Boom™
Designed for small waterways and ditches, the ADSORBIT® Contour Ditch Boom is the ultimate tool for rapid deployment.
Item Number: EDB24-5
Made for rapid deployment in small waterways and ditches where an oil release has occurred or where ongoing oil sheen is an issue. The Contour Ditch Boom was designed to hug the bottom and follow the uneven contours of ditches and small waterways. This practical design makes accessing these traditionally hard-to-reach areas much easier.
- Permanently attached ballast chain in chain gallery located in the bottom of the 24 inch tall, 5 foot wide single-ply ADSORBIT fabric curtain.
- Upper portion boom gallery with a 3 inch polypropylene boom permanently installed for flotation. The boom rides on the surface of the water, forcing the water to flow through the 24″ fabric curtain while removing oils, oil sheen and oil-borne contaminants.
- An 11 foot polypropylene rope is sewn in directly below the boom gallery, and extends 3 feet beyond each end to allow attachment of the Contour Ditch Boom to stakes or other retaining media.
- The ADSORBIT filtration fabric provides approximately 100 micron filtration, thus the Contour Ditch Boom will act to reduce silt levels in the flowing waters.
| Length | Curtain | Diameter Boom | Case Pack | Item Number |
| 5′ | 24″ | 3″ | 10 | EDB24-5 |
Contact us to purchase.
Put Oil in its Place