Boom & Dock Curtain™
Continuously (and easily!) remove oil and sheen at marinas and docks.
Item Number: MBC15-10
The ADSORBIT Boom & Dock Curtain is designed to be attached to floating docks, barges, boat lifts, rafts, fence booms and a variety of other floating media to continuously remove oils, oil sheen and oil-borne contaminants that have been released into the water.
- Constructed of a loop of ADSORBIT filtration fabric to form a curtain approximately 15 inches high by 10 feet in length. Polypropylene webbing is attached to the edges of the curtain for vertical reinforcement and to the top edge to allow the placement of grommets for mounting.
- Grommets and snap hooks are placed at each end and at 20 inch intervals along the top edge of the curtain. There are also grommets placed at 10 inches in from each end for interconnecting multiple units. There are grommets and snap hooks at the lower ends of the curtain loop for attachment and removal of the lightweight ballast chain that is installed in the lower extreme of the curtain.
- To reuse, simply remove the ballast chain and snap hooks. You can then press, wring, or centrifuge to remove and recover the retained oils for recycling or disposal. Replace the ballast chain and the Boom & Dock Curtain is ready to reuse!
| Length | Curtain | Case Pack | Item Number |
| 10′ | 15″ | 5 | MBC15-10 |
Contact us to purchase.
Put Oil in its Place